USE
Our boards can be used for both preparing and serving. We use heat resistant epoxy resin to ensure that they can come in contact with any environment and not lose their quality finish. When chopping, turn the board over so you are chopping directly on the wood, not the resin.
CARE INSTRUCTIONS
All of our wood products need to be hand washed, and treated with edible oil when the wood begins to look dry.
FOOD SAFETY
We only advise the resin is used for incidental food contact with foodstuffs e.g nuts, biscuits etc. The resin should not be cut on directly. The resin is just for decorative purposes.
DO's & DONT's
- DO dry immediately after washing. We don’t want any water absorbing into the wood.
- DO either wipe down with just wet cloth or use a small amount of soap if necessary. If nothing too aromatic has been in contact with your board (fruits and some vegetables) simply wipe it down. However, if you are cutting something potent like garlic, soap is a definite must as wood can hold the smell and transfer it to your next meal. (Trust me on this one, garlic and watermelon do not taste good together.) But remember - the less soap the better! The soap will draw out the woods oil meaning you will need to oil your resin board more regularly.
- DO treat it with oil. The same way our skin needs moisturiser to be beautiful and soft, your chopping board needs oil to be strong and vibrant. The more we wash our boards, the more we draw out the natural oils which makes it prone to splitting and warping. The best way to know when your board is craving oil is to look at the colour of the wood, the duller the brown, the drier the wood.
- DO use coconut, mineral, linseed, beeswax or tung oil. My favourite is a mixture of coconut oil and beeswax, the coconut oil is one of the least rancid oils and the beeswax makes it water-resistant which means you won’t have to oil it as frequently. Simply rub the oil into the wood with a rag or cloth until the whole board is covered and not absorbing any more oil. Hack: You can buy coconut oil cooking spray at the supermarket and all you have to do is spray over the board. Too easy.
- DO NOT use vegetable or olive oil. These will become rancid and begin to smell.
- DON’T put it in the dishwasher. Wood is a beautiful natural material that has the ability to both bring water into its grain as well as repel it. When too much water gets absorbed by wood it begins to expand and this is what makes a cutting board warp, bend and crack. In a dishwasher there is a lot of water and heat… not a friendly place for your new chopping board.
- DON’T let it soak in water. If you leave your chopping board in water for too long, it will absorb too much water, and yep, it will bend and crack. Not good.